執行器安裝操作手冊-中英對照
TM-25LP，TM-200LP 執行器
說明手冊 82450J
警告
在設備安裝，操作，或者維修之前，請?jiān)敿?xì)閱讀該說明手冊，以及所有的關于施工作業的其它出版物。執行全部的設備說明、安全指示和預防措施。 如果沒有遵循說明要求進行操作，可能會造成人身傷害和/或財產損失。
發動機，渦輪機，或其它類型的驅動器必須裝備有一個過速防止停車裝置，防止驅動器失控或者損壞，從而造成人身傷害，設備壽命縮短，或財產損失。
過速停車裝置必須完全獨立與驅動器系統。超溫或者超壓安全停車裝置也必須酌情加以裝備。
小心
使用一臺交流發電機或電池充電設備，防止對控制系統造成損壞，確保在電池與系統切斷之前，充電的設備已經關閉。
電子控制裝置包括靜電敏感部件。必須遵循下列預防措施，防止對下列部分造成損壞。
● 在操作和控制作業前，將車身的靜電釋放完 (在控制裝置的電源關閉后，接觸接地表面并在操作控制時保持接觸)。
● 印制電路板周?chē)苊馊渴褂盟芰�，乙烯�?shù)脂和發泡苯乙稀材料(抗靜電類型除外)。
● 不得接觸印制電路板或者導電裝置上的的設備零部件或?qū)w。
重要定義
警告-表示如果不進行避免，將導致死亡或者重傷的一種潛在危險。
小心-表示如果不進行避免，將導致對設備造成損壞的一種潛在危險。
注意-表示提供其它的幫助信息，并不屬于警告或者小心類別的信息。
版本--正文的變化在旁邊用一條黑色的線注明
伍德沃德公司保留對任何時期對任何部分進行改進的權利。 伍德沃德提供的信息是正確和可靠的。除非伍德沃德公司聲明，伍德沃德公司對此不承擔任何責任。
伍德沃德公司 1981
版權所有
說明手冊82450 TM-25LP/TM-200LP 執行器
內容
注意事項和警告條例…............................................................................................................ II
第一章：通用信息……............................................................................................................ 1
說明…….................................................................................................................................... 1
參考……................................................................................................................................... 1
輸出量指導……....................................................................................................................... 1
單繞組或雙繞組……............................................................................................................... 1
第二章：安裝…........................................................................................................................ 2
簡介…........................................................................................................................................ 2
收受............................................................................................................................................ 3
儲存........................................................................................................................................... 3
安裝........................................................................................................................................... 3
條例........................................................................................................................................... 5
第三章：................................................................................................................................... 10
執行器的初期運行................................................................................................................... 10
調整........................................................................................................................................... 10
第四章：操作原則.................................................................................................................... 11
簡介............................................................................................................................................ 11
操作........................................................................................................................................... 11
第五章：維護............................................................................................................................ 13
簡介............................................................................................................................................ 13
過濾器清洗................................................................................................................................ 13
故障排除.................................................................................................................................... 14
第六章：零件更換.................................................................................................................... 15
簡介............................................................................................................................................ 15
零件更換信息............................................................................................................................ 15
第七章：服務選項.................................................................................................................... 18
產品服務選項........................................................................................................................... 18
設備退還進行修理.................................................................................................................... 19
零件更換.................................................................................................................................... 20
聯系Woodward......................................................................................................................... 20
工程師服務................................................................................................................................ 21
技術協助.................................................................................................................................. 22
圖解和表格
圖-2-1. TM-25LP/TM-200LP 執行器 （新型）................................................................... 6
圖-2-2. 雙繞組位移反饋 TM-25LP/TM-200LP 執行器 .................................................... 7
圖-2-3. 單繞組配線.................................................................................................................. 8
圖-2-4. 雙繞組配線.................................................................................................................. 9
圖-4-1. TM-25LP/TM-200LP執行器 單繞組和雙繞組圖解................................................ 12
圖-6-1. TM-200LP分解圖........................................................................................................ 17
圖-2-1. 供給特性...................................................................................................................... 4
圖-2-2. 流程要求...................................................................................................................... 4
圖-2-3. 電學特性...................................................................................................................... 4
圖-2-4. 輸出量特性.................................................................................................................. 5
伍德沃德 1
TM-25LP/TM-200LP 執行器 說明手冊82450
注意事項和警告條例
安裝和操作注意事項和要求總則：
TM-25LP 和TM-200LP裝置適用于加拿大和美國的CSA 和UL標準的第一 類別，第一部分， C 和D組， 以及第二 類別，第二部分， B，C，和D組或者非危險區域。
TM-25LP 和TM-200LP裝置適用于LCIE認證標準：歐洲第1 區域， IIC組環境。
接線必須符合北美，類別1，第1 區域或者歐洲第1 區域，或歐洲第2區域的導線接線方法，并服從有關管轄機構的管理。
每臺力矩電動機必須在安裝之前，配有900 mA最大值的保險絲。
力矩電動機的標準電壓一定限制在30 V，開關電壓為480 V。
現場接線作業必須在不少于90℃以及高于周?chē)ぷ鳒囟?0℃的環境中進行。
地面終端和接地。
這些目錄只限于CSA，UL 和LCIE 代理認證以及CE標準。
警告
爆炸危險--不要移開去蓋子，連接或者斷開連結裝置，除非電源已經關閉，或該區域已經確定沒有危險時。
爆炸危險—更換的零部件可能違反了，類別1，部分2或者第2 區域標準的規定。
AVERTISSEMENT
Risque d'explosion—Ne pas en lever les couvercles, ni raccorder / debrancher les prises electriques, sans vous en assurez auparavant que le systeme a bien ete mis hors tension; ou que vous vous situez bien dans une zone non explosive.
Risque d'explosion—La substitution de composants peut rendre ce materiel
inacceptable pour les emplacements de Classe I, Division 2 ou Zone 2.
WOODWARD
Installation and Operation Manual
TM-25LP, TM-200LP Actuators
Manual 82450J
WARNING
Read this entire manual and all other publications pertaining to the work to be performed before installing, operating, or servicing this equipment. Practice all plant and safety instructions and precautions. Failure to follow instructions can cause personal injury and/or property damage.
The engine, turbine, or other type of prime mover should be equipped with an overspeed shutdown device to protect against runaway or damage to the prime mover with possible personal injury, loss of life, or property damage.
The overspeed shutdown device must be totally independent of the prime mover
control system. An overtemperature or overpressure shutdown device may also be
needed for safety, as appropriate.
CAUTION
To prevent damage to a control system that uses an alternator or battery-charging device, make sure the charging device is turned off before disconnecting the battery from the system.
Electronic controls contain static-sensitive parts. Observe the following precautions to prevent damage to these parts.
• Discharge body static before handling the control (with power to the control turned off, contact a grounded surface and maintain contact while handling the control).
• Avoid all plastic, vinyl, and Styrofoam (except antistatic versions) around printed circuit boards.
• Do not touch the components or conductors on a printed circuit board with your hands or with conductive devices.
®
IMPORTANT DEFINITIONS
WARNING—indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION—indicates a potentially hazardous situation which, if not avoided, could result in damage to equipment.
NOTE—provides other helpful information that does not fall under the warning or caution categories.
| Revisions—Text changes are indicated by a black line alongside the text
Woodward Governor Company reserves the right to update any portion of this publication at any fame. Information provided by Woodward Governor Company is believed to be correct and reliable. However, no responsibility is assumed by Woodward Governor Company unless otherwise expressly undertaken.
©Woodward 1981
All Rights Reserved
Manual 82450 TM-25LP/TM-200LP Actuators
Contents
REGULATORY COMPLIANCE NOTES AND WARNINGS n
CHAPTER 1. GENERAL INFORMATION 1
Description 1
References 1
Direction of Output 1
Single or Dual Coil 1
CHAPTER 2. INSTALLATION 2
Introduction 2
Receiving 3
Storage 3
Installation 3
Regulatory Compliance 5
CHAPTER 3. INITIAL OPERATION OF THE ACTUATOR 10
Initial Operation 10
Adjustments 10
CHAPTER 4. PRINCIPLES OF OPERATION 11
Introduction 11
Operation 11
CHAPTER 5. MAINTENANCE 13
Introduction 13
Filter Cleaning 13
Troubleshooting 14
CHAPTER 6. REPLACEMENT PARTS 15
Introduction 15
Replacement Parts Information 15
CHAPTER 7. SERVICE OPTIONS 18
Product Service Options 18
Returning Equipment for Repair 19
Replacement Parts 20
How to Contact Woodward 20
Engineering Services 21
Technical Assistance 22
Illustrations and Tables
Figure 2-1. TM-25LP/TM-200LP Actuator (New Style) 6
Figure 2-2. Dual Coil TM-25LP/TM-200LP Actuator with Position Feedback 7
Figure 2-3. Single Coil Wiring 8
Figure 2-4. Dual Coil Wiring 9
Figure 4-1. Single/Dual Coil Schematic, TM-25LP/TM-200LP Actuator 12
Figure 6-1. TM-200LP Exploded View 17
Table 2-1. Supply Characteristics 4
Table 2-2. Flow Requirements 4
Table 2-3. Electrical Characteristics 4
Table 2-4. Output Characteristics 5
Woodward
i
TM-2SLP/TM-200LP Actuators
Manual 82450
Regulatory Compliance Notes and Warnings
General Installation and Operation Notes and Requirements:
The TM-25LP and TM-200LP are suitable for use in Class I, Division 1, Groups C and D, and Class I, Division 2, Groups B, C, and D per CSA and UL for Canada and US or non-hazardous locations only.
The TM-25LP and TM-200LP are suitable for use in European Zone 1, Group IIC environments per LCIE certification.
Wiring must be in accordance with North American Class I, Division 1 or 2 or European Zone 1 wiring methods as applicable, and in accordance with the authority having jurisdiction.
Each torque motor must be provided with a 900 mA maximum fuse to be installed before the torque motor.
Voltage to the torque motor must be limited to a nominal voltage of 30 V with a switch-off voltage of 480 V.
Field wiring must be suitable for at least 90 °C and 10 °C above the ambient operating temperature.
Connect ground terminal to earth ground.
These listings are limited only to those units bearing the CSA, UL, and LCIE agency identification and the CE Marking.
~JT WARNING
/nj|\ Explosion Hazard—Do not remove covers or connect/disconnect electrical
connectors unless power has been switched off or the area is known to be
non-hazardous.
Explosion Hazard—Substitution of components may impair suitability for
Class I, Division 2 or Zone 2.
AVERTISSEMENT
Risque d'explosion—Ne pas en lever les couvercles, ni raccorder / debrancher les prises electriques, sans vous en assurez auparavant que le systeme a bien ete mis hors tension; ou que vous vous situez bien dans une zone non explosive.
Risque d'explosion—La substitution de composants peut rendre ce materiel
inacceptable pour les emplacements de Classe I, Division 2 ou Zone 2.
2012.12.14