00.3. 對于初次從事保養工作的指導說明
保養和修理人員必須熟悉設備的操作、工作原理以及設備系統的設計功能。保養部分主要是介紹正確和安全地進行設備的保養和修理工作。在進行該工作之前，仔細地研究本指南的說明是重要的。
00.3.1. 總體說明
對于設備的試車和首次定期保養應被特別的關注。制造廠家已經為起重機專門編寫了一個定期保養時間表。制造廠家著重講述了制定一個保證設備處于適當安全水平的保養程序。用于正確保養的數據是采集自廣泛調查研究的結果。除此之外，從不同操作條件下得到的反饋信息已經過我們仔細地分析。
認真地執行制造廠家指定的保養時間表，對設備進行周期性和有效的保養。制造廠家設有高水平保養的有償培訓，如果在用戶需要，稱職和有經驗的培訓人員可以隨時安排培訓課程。
00.3.2. 保養和修理的人員
只允許受過適當培訓的員工才可以從事本起重機的修理和保養工作。為保養和修理工作選擇合適的人員應是雇主的責任�？紤]到工作安全，雇主有責任對從事本起重機的修理和保養的人員進行培訓，使之勝任工作。
決不要將更換下的油、油脂和其它液體倒在地上或者倒入下水道！我們應承擔起環境保護的責任。只允許受過培訓的員工才可以從事本起重機的修理和保養工作。
保養人員是指進行定期保養和可能修理該設備的人。必須保證該人員的工作素質，如定期地對其進行多次培訓。雇主有責任保證保養和修理人員的在崗素質。該設備不能由失去技能的人員進行保養和修理。如果必要，雇主要對從事該設備保養和修理的人員進行再培訓。
00.3.3. 保養時設備的準備
在進行保養和修理工作之前要事先做好計劃。講明保養工作的范圍。通過閱讀保養和修理指南，為保養和修理工作做好準備。自己要準備好維修工作所需的工具和材料。確認將要使用的工具是否正確以及處于良好的狀態。確認那些用于指示可能產生危險狀態的標識牌是否已經就位。
名稱 日期 篇 頁碼
綜合信息/定期保養 98-06-17 EH00-0005 11/38
在進行維修保養工作之前：檢查自上一次維修保養后的設備運轉情況。檢查以前的檢修報告�；谒占男畔�，估計出期望的安全等級；哪些問題應該在下次維修保養中予以考慮。
頁碼 篇 日期 名稱
12/38 EH00-0005 98-06-17 綜合信息/定期保養
00.3.4. 工具
在保養和修理工作中只能使用合適的工具。
00.3.5. 保養報告
在進行維修工作當中，按照由制造廠家編寫的維修時間表系統地報告該項工作。注明損壞情況和修理措施。制造廠家編寫的維修時間見在本章節中“首次維修和定期維修”部分。
在每次維修后，要在報告中定義和記錄該設備安全狀態。如果按照你的估計，該設備與設計的安全狀態不相符合，向負責安全的上級進行匯報。在每次維修后，填寫維修報告。
在進行維修工作中，通知你的上級或者負責已有問題修理的人員。在故障和損壞被修好之前，該設備不得運行。
檢查你的報告記錄是否完整。對于修理項目要分別記錄，準確地注明修理的措施。除此之外，應嘗試著找出該項損壞的原因。
00.3.5.1. 危險情況報告
在維修工作中或者在維修以后，都要以書面的形式，向你的上級或者負責安全的人員匯報觀察到的危險情況。
報告中的記錄要仔細填寫。該報告在必要時要具有可分析性是十分重要的。
00.3. Instructions for initiating into maintenance work
The service and repairpersonnelmust be clearabout themachine operation,the workingprin-
ciples, and the designed functions of the machine systems. The service section is meant as
anintroductiontoenablecorrectandsafeserviceandrepairwork.Therefore itisimportantthat
the instructions in the manual are studied carefully prior to work.
00.3.1. General instructions
To the commissioning of a newmachine and the first scheduled servicesshould be paid a spe-
cial attention. The manufacturer has drawn up a special service schedule particularly for this
machine.Themanufacturerhascontributedsignificantlytodevelopaserviceprogramtomain-
tain the propersafetylevelof the machine. Data forcorrect maintenance measures have been
collected as result of an extensive research work. In addition to this, feedback from different
operating conditions has been considererd very carefully.
Bycarefulfollowing of the maintenance schedule specified bythe manufacturer,a rationaland
economicmaintenanceofthemachineisenabled.Themanufacturerhasinvestedin theprofit-
abletrainingmaintenancesofahighlevelperformance.Qualifiedandexperiencedtrainersare
always available, if problems arise at the client.
00.3.2. Maintenance and repair personnel
The machine may be serviced and repaired by qualified and trained personnel only. The em-
ployer is responsible for selecting of the person suited to the service and repair duties. The
employer is responsible for training of the service and repair personnel into the proper work-
manship considering the safety at work.
Never pour oils, greases and liquids changed during the maintenance
down the drain or in to the earth! Bear the responsibility for the environ-
ment! Only a trained personnel is allowed to maintain the machine.
The service person refers to a person, who performs the scheduled services and eventual re-
pairsatthemachine.Theservicepersonmustattendtomaintainhisqualifications,e.g.byperi-
odically repeated training. The employer is responsible for maintaining of the qualifications of
the service and repair personnel. The machine must not be serviced or repaired by personnel
who has lost skills. If necessary, the employer must retrain the person selected for the service
and repair work at the machine.
00.3.3. Preparing of the machine for maintenance
The service and repair work should be performed in the premises intended for this use. State
the extent of the service work. Prepare yourself for the service or repair work by reading the
service and repair manuals. Prepare yourself for the work by tools and materials needed. See
Description Date Group Page
General Information/Scheduled Mainteance 98- -06- -17 EH00- -0005 11/38
to it that the tools to be used are proper and in good condition. See to it that the warning signs
for eventual hazardous situations have been placed in position.
Prior to the service work: Check the reparations made in the operation of the machine since
the last service. Check the previous service report. Try to find out the expected safety level on
the basis of the information collected; which points shall be particularly considered at the next
service.
Page Group Date Description
12/38 EH00- -0005 98- -06- -17 General Information/Scheduled Mainteance
00.3.4. Tools
Use only proper tools at the service and repair work.
00.3.5. Maintenance reports
When performing the service, report the work systematically in accordance with the service
schedule drawn up by the manufacturer. Note carefully damages observed and repair mea-
sures.Theservicescheduledrawnupbythemanufacturerispresentedinsection’Firstservice
and scheduled service’ of this main group.
Define and record the safety level of the machine in the service report after every service. If,
byyourestimation, the machine doesn’t correspond to the designed safety level, inform of this
your superior responsible for the safety. After every service, file the service reports.
Informyoursuperiorortheperson responsibleforrepairsof faultsobserved atthe service.The
machine must not be operated until the faults and damages have been repaired.
Seetoitthatyourservicereportsareperfectlyrecorded.Recordtheobjectstobe repairedindi-
vidually,andnotetherepairmeasuresprecisely.Inadditiontothis,trytofindout,whytheobject
has been damaged.
00.3.5.1. Reporting of dangers
Alwaysinformin writingyoursuperiorortheperson responsibleforsafetyof dangersobserved
in the service environment or in machines serviced.
The reports recorded must be filed carefully. It is essential that the reports are available to be
analyzed if necessary