招標答疑文件翻譯-中英對照
蓄冰盤管外形-附后
3. Appearance of ice storage coil pipe - attached
2、 產品執行標準
4. Executive standard of products
1)、 設計、制造、檢驗標準（ASME認證）
1). Design, manufacturing, and testing specification (ASME certification)
益美高公司取得了ASME認證，其設計、制造、檢驗等均遵從ASME認證標準。益美高蓄冰設備的詳細設計、制造檢驗標準見“蓄冰設備設設計、制造、檢驗、試驗執行標準”。
Evapco Company has obtained the certification of ASME, the designs, manufacturing and testing, etc. comply with the standard of ASME certification. The detailed design and manufacturing standard of ice storage equipment of Evapco see “designs, manufacturing and inspection and executive standard of ice storage equipment”.
2)、 蓄冰設備材料檢驗、試驗標準
2). materials inspection and testing standard of ice storage equipment
盤管原材料為美國標準的16號條形鋼板，標號：ASTMA505。連箱材料標號： ASTMA36。
The raw materials of coil pipe applies the No. 16 steel plate of Unite States Standard, label: ASTMA505. Material label of connected case: ASTMA36
國標GB/T5213-2001, 08AL級。
National Standard GB/T5213-2001, 08AL grade
ASME認證標準。
ASME certificate standard
3)、 產品設計標準
3). Design standard of the product
ARI (美國空調制冷協會) 的 900標準;
The 900 standard of Air-conditioning and Refrigeration Institute (ARI)
ARI 的Guideline T準則，即美國蓄冰空調設計準則；
The Guideline T principle of ARI, i.e., the design principle of ice storage air-conditioner in America
GB9237-88 制冷設備通用技術規范
GB9237-88 General technical code for refrigerating plants
JB6917-1988 制冷裝置用壓力容器
JB6917-1988Pressure vessel for refrigerant equipment
4)、 制造、檢驗、試驗標準
4). Standard of manufacturing, inspection and test
ISO9001:2000質量管理體系認證
ISO9001 : 2000 quality management system certification
Evapco公司已獲得ISO9001:2000質量管理體系認證，認證書編號為US-3934，項目編號為011072 。
Evapco Company has obtained the ISO9001:2000 quality management system certification with the certificate No. US-3934 and project No. 011072.
原材料標準
Standard of origin material
盤管原材料為美國標準的16號條形鋼板，標號：ASTMA505。連箱材料標號： ASTMA36。
國標GB/T5213-2001, 08AL級。
The raw materials of coil pipe apply No. 16 steel plate of Unite States Standard, label: ASTMA505. Material label of connected case: ASTMA36.
National Standard GB/T5213-2001, 08AL grade
焊接標準
Welding standard
焊接制造標準嚴格符合Evapco公司工廠的廠標，并獲得ASME認證及ISO9001:2000質量管理體系認證。
The welding manufacturing standard shall strictly comply with the factory standard of Evapco Company and obtain the ASME certification and the ISO9001:2000 quality management system certification.
鍍鋅標準
Galvanization standard
盤管的鍍鋅標準性嚴格符合美國ASTMA123-89a標準。
The galvanization standard of coils shall strictly comply with the ASTMA123-89a standard in America.
GB/T13912-2002金屬覆蓋層、鋼鐵制件熱浸鍍鋅層技術要求及實驗方法。
GB/T13912-2002 Technical requirement and experimental method of metal coating layer and hot dip galvanized coatings on fabricated Iron and steel parts
探傷標準
Flaw detection standard
Evapco的探傷方式取得了ASTM-E309的認證。
The flaw detection method of Evapco has obtained the ASTM-E309 certification
氣密標準
Air-tightness standard
嚴格執行ASME B31.5標準。
The ASME B31.5 standard shall be strictly implemented
檢驗標準
Inspection standard
檢驗標準嚴格符合Evapco公司工廠的廠標，并獲得ASME及ISO9001:2000質量管理體系認證。
The implementation standard shall strictly comply with the factory strictly comply with the factory standard of Evapco Company and obtain the ASME certification and the ISO9001:2000 quality management system certification
包裝標準
Packaging standard
包裝方式嚴格符合Evapco公司質量規范系列，并獲得ISO9001:2000質量管理體系認證。
The packaging method shall strictly comply with the quality specification series of Evapco Company and obtain the ISO9001:2000 quality management system certification
運輸標準
Transportation standard
運輸嚴格符合Evapco公司質量規范系列，并獲得ISO9001:2000質量管理體系認證。
The transportation method shall strictly comply with the quality specification series of Evapco Company and obtain the ISO9001:2000 quality management system certification
調試標準
Commissioning standard
GB/T19412-2003 《蓄冷空調系統的測試和評價方法》
GB/T19412-2003 "testing and evaluation of cool storage air conditioning system”
Evapco調試標準嚴格遵循ARI 的 900標準。
The commissioning standard of Evapco Company shall strictly comply with the 900 standard of ARI
一、 管道沖洗
III. Pipeline cleaning
管道試壓前，必須對管道進行沖洗，沖洗之前必須將設備前管道進行短路，以防臟物在設備內沉積，沖洗時先將盤管與干管連接處斷開進行沖洗，后沖洗主干管，水從高端進入，以目測出水口水流清潔為合格，同時填寫系統沖洗記錄，送甲方、監理等有關人員會簽。管道沖洗方案視現場情況另行制定。
Before pressure testing, it is necessary to clean the pipeline, and short out front pipeline of equipment before cleaning procedure in case of impurities deposited in equipment; clean the disconnected joints of the coil pipe and main pipeline, and then clean the main pipeline. The water is entered from higher position; water from outlet is clean for qualifying through the visual inspection; fill the system cleaning record at the same time. And submit to the relevant personnel of Party A and management etc. for countersign. The pipeline cleaning scheme shall be arranged according to the status on site.
蓄冰設備在工廠已進行沖洗，管道沖洗時蓄冰設備可不進行沖洗；機房內管道安裝完畢后應按標準進行沖洗，沖洗效果需經過我單位同意后方可與冰槽內管道連接。
Ice storage equipments shall be cleaned in the factory. Ice storage equipments need not perform cleaning procedure in case of pipeline cleaning; the pipeline should be cleaned according to the relevant standard after being installed in the computer lab; the cleaning result shall be checked by our unit and join with the interior pipeline of ice tank after approval.
二、 壓力試驗
IV. Pressure test
1、 槽體閉水試驗
1. Closed water test of tank body
蓄冰槽防水主要有兩層：
The ice storage tank has two layers for waterproof:
第一層是防水砂漿層后的3mm厚JS防水涂料，本層防水施工完畢后應進行24小時的冰槽閉水試驗。
The first layer is 3mm JS thick waterproof coating behind the waterproof mortar course, the waterproof operation of this layer shall perform 24 hours closed water test of ice tank body after completion.
第二層是保溫層后的玻璃鋼防水層，本層防水施工完畢后應進行24小時的冰槽閉水試驗。
The second layer is glass fibre reinforced plastic waterproof layer after heat preservation, the waterproof operation of this layer shall perform 24 hours closed water test of ice tank body after completion.
2013.2.3